-
Ag2000
- Site Admin
- Posts: 229
- Joined: Wed Sep 04, 2019 11:50 pm
- Location: Colorado, USA
-
Contact:
Post
by Ag2000 » Mon May 15, 2023 12:35 am
- Added items to the documentation.
- Finished the Side-Clamps, so now making progress on the jig to make labels.
- Changed the design for displaying the target location for the boxcars from quad alphanumeric displays, to single 7-segment displays.
- Progress wiring custom circuit boards for new design.
- Started design for IR sensors.
- Working on circuit for flashing LED for lighted bumper.
New/updated items in the documentation are '*'
Inglenook documentation.
Say what you will about Sisyphus. He always has work.
-
Ag2000
- Site Admin
- Posts: 229
- Joined: Wed Sep 04, 2019 11:50 pm
- Location: Colorado, USA
-
Contact:
Post
by Ag2000 » Mon May 22, 2023 6:15 pm
- Updated, reformatted the List of Moves to look more like the simulator/layout.
- More parts ordered for IR sensors.
- Added a video/screen shot of the Simulator.
- Simulator needs work.
Say what you will about Sisyphus. He always has work.
-
Ag2000
- Site Admin
- Posts: 229
- Joined: Wed Sep 04, 2019 11:50 pm
- Location: Colorado, USA
-
Contact:
Post
by Ag2000 » Mon May 29, 2023 2:12 am
- Updated the photo of milling the jig in "Ore Car Label Jig."
- Added photos of the custom board for the numeric display.
- Completed the circuit design for the lighted bumper.
Say what you will about Sisyphus. He always has work.
-
Ag2000
- Site Admin
- Posts: 229
- Joined: Wed Sep 04, 2019 11:50 pm
- Location: Colorado, USA
-
Contact:
Post
by Ag2000 » Mon Jun 05, 2023 1:03 am
Post for May
Say what you will about Sisyphus. He always has work.