June 2023

Computer Controlled Inglenook Puzzle Implementation
Post Reply
User avatar
Ag2000
Site Admin
Posts: 235
Joined: Wed Sep 04, 2019 11:50 pm
Location: Colorado, USA
Contact:

June 2023

Post by Ag2000 » Mon Jun 05, 2023 12:55 am

4 Jun '23
Say what you will about Sisyphus. He always has work.

User avatar
Ag2000
Site Admin
Posts: 235
Joined: Wed Sep 04, 2019 11:50 pm
Location: Colorado, USA
Contact:

Re: 11 Jun '23

Post by Ag2000 » Wed Jun 14, 2023 4:08 pm

11 Jun '23
  • Heavy work on the Ore car label jig is done.
  • Need to make bits & pieces to use jig - clamps & T-nuts.
  • Updated/finished the Tortoise/Wabbit/Turnout wiring documentation.
  • Built and documented the circuit board for the blinking lights on the head shunt bumper.
Say what you will about Sisyphus. He always has work.

User avatar
Ag2000
Site Admin
Posts: 235
Joined: Wed Sep 04, 2019 11:50 pm
Location: Colorado, USA
Contact:

Re: 04 Jun '23

Post by Ag2000 » Mon Jun 19, 2023 6:41 am

18 Jun '23
  • Finished the T-nuts for the label jig.
  • Started the brackets to use with the label jig.
  • Added pictures of the red/green LED used with the turnouts.
  • Finished the bumpers.
Say what you will about Sisyphus. He always has work.

User avatar
Ag2000
Site Admin
Posts: 235
Joined: Wed Sep 04, 2019 11:50 pm
Location: Colorado, USA
Contact:

Re: 04 Jun '23

Post by Ag2000 » Mon Jun 26, 2023 5:54 am

25 Jun '23
  • The strap clamps to hold material and L-clamps to hold the label jig are to basic shape.
  • Two L-clamps are done except for some clean-up.
  • All HSS mill cutters and drills used are dull and being replaced.
  • More tools ordered.
Clamps for Label & Jig
Say what you will about Sisyphus. He always has work.

Post Reply