This section of the initialization screen lets you select which labels are displayed on the simulator graphics. Many of the labels were originally displayed for development but they "clutter" the screen now.
With the radio button "Select Above" selected, you can check or un-check individual boxes at the top and then click <Update Labels Displayed>. Alternatively, you can use the radio buttons at the bottom to select "All" or "None" of the labels, then click <Update Labels Displayed>.Changes will immediately take effect in the graphics display window.
Note: The signal labels will not be displayed if the "Display Signals" is not also selected.
Display options are retained until you <End TrainThing>. Choices can be changed any time this screen is displayed.