Delays

Computer Controlled Inglenook Puzzle Implementation
Post Reply
User avatar
Ag2000
Site Admin
Posts: 224
Joined: Wed Sep 04, 2019 11:50 pm
Location: Colorado, USA
Contact:

Delays

Post by Ag2000 » Thu Apr 27, 2023 2:44 am

The speed sensor for the mill are on back order: Due 12 Jul! More than 2 months.

The vertical mill is needed to make the side clamps, to hold the material to make the jig, using the mill, to make the labels. And then to make the labels.
Say what you will about Sisyphus. He always has work.

User avatar
Ag2000
Site Admin
Posts: 224
Joined: Wed Sep 04, 2019 11:50 pm
Location: Colorado, USA
Contact:

Re: Delays

Post by Ag2000 » Thu May 11, 2023 7:46 pm

Turns out the speed sensor was not faulty. The motor speed control board was. Circuit board ordered, received, replaces, and tested.

Back to work.
Say what you will about Sisyphus. He always has work.

Post Reply